This ARTR include a completed display model,but still ready for RC functions.

ARTR introduction:	Almost ready to run (ARTR)! Built by ARKMODEL master's handcraft! Suit for displaying and RC running. Only need plug in WTC, the model will run soon!
ARTR included:	Finished boat is an installde model. Painted by Arkmodel master. But WTC and other electronic parts which are in WTC such as motor, pump, ESC, ERS, RC battery are not included. Upgrade parts such as mast elevation system, camera /video system are also not included.If you need buy these, please check parts list below. We can fix these parts in boat for you freely.If you need appoint special painting, such as a different country, a different period. If changed in a large, you may pay extra cost.
Delivery time:	If not in stock, Kit delivery time is 3-5 weeks, ARTR delivery time is 5-10 weeks.

Click in for product detail

This kit include all hardware for build a model.Update functions need extra parts.

Kit introduction:	This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull made by FRP/ABS. Deck&superstructure made by ABS/wood/epoxy sheet (CNC). Detail fitting parts made by casting resin or metal. All metal parts such as running set made by CNC precision sizing. Kit includes colour decal. Kit includes large size brass photo etch. Kit includes huge size drawing. Kit includes 3D illustrated step by step instruction.
Kit included:	This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes a hull, decks, Injection parts, CNC-sheets, decals, brass photo etch, instructions and other parts for WTC installation. WTC（water tight cylinder）is a sealed cabin that accommodates all machinery and electronic equipments, such as motors, waterpump, solenoid valve, servo, ESC, ERS, RC, battery etc. WTC supplies subamrine the ability of running, diving, and floating. You must buy WTC seperately. Please note that WTC has 2 typies, single tank and double tanks.
Delivery time:	If not in stock, Kit delivery time is 3-5 weeks, ARTR delivery time is 5-10 weeks.

Click in for product detail

Optional Part This Alloy Case is made by slive alloy board soft EVA.the best choice to protect boat for carry. we recommend when by the finished model to by this alloy case together. However,Because of the uncontrlable factors we can't ensure that the model is no damaged in the transportion.

Optional Part This standard carton box is made by EPE foam.the best choice to protect tank for carry. we recommend when by the finished model to by this plastic box together. However,Because of the uncontrollable factors we can't ensure that the model is no damaged in the transportation.

Optional Part This Luxy Display Stand made by transparent board and stainless steel tube,it's very nice for display.

Transparente Röhre W7616CT

Optional Part

Optional Part This product has a variety of sound system for you to choose. Click here

WTC Kit included:	WTC is used to drive submarines for navigation and diving. The kit consists of some parts that need to be assembled by yourself.The kit includes transparent tubes, motors, piston water tanks, sealing rings and other spare parts. It does not include steering gear, electronic speed controller, electronic switches, remote control equipment, batteries, etc.The WTC needs to be purchased separately and is not included in the submarine kit.Paint and glue are also not included in the hull kit.You can choose to purchase from the list on the web page.
WTC ARTR included:	The WTC has been assembled, including electric parts such as drive motors and piston water tanks. It only needs to be installed in the hull to realize the navigation and dive functions of the submarine model, but the sealed cabin finished products do not include remote control equipment, batteries, and rudder. Electronic devices such as the electronic governor, the water tank control unit BCU, etc. You can order these devices yourself in the web page list, we can install them for free.
Delivery time:	If not in stock, Kit delivery time is 3-5 weeks, ARTR delivery time is 5-10 weeks.

WTC Kit included:	WTC is used to drive submarines for navigation and diving. The kit consists of some parts that need to be assembled by yourself.The kit includes transparent tubes, motors, piston water tanks, sealing rings and other spare parts. It does not include steering gear, electronic speed controller, electronic switches, remote control equipment, batteries, etc.The WTC needs to be purchased separately and is not included in the submarine kit.Paint and glue are also not included in the hull kit.You can choose to purchase from the list on the web page.
WTC ARTR included:	The WTC has been assembled, including electric parts such as drive motors and piston water tanks. It only needs to be installed in the hull to realize the navigation and dive functions of the submarine model, but the sealed cabin finished products do not include remote control equipment, batteries, and rudder. Electronic devices such as the electronic governor, the water tank control unit BCU, etc. You can order these devices yourself in the web page list, we can install them for free.
Delivery time:	If not in stock, Kit delivery time is 3-5 weeks, ARTR delivery time is 5-10 weeks.

WTC Kit included:	WTC (water tight cylinder) is used to drive submarines for navigation and snorkeling. The kit consists of some parts that need to be assembled by yourself.The kit includes transparent tubes, motors, water pumps, sealing rings and other spare parts. It does not include steering gear, electronic speed controller, electronic switches, remote control equipment, batteries, etc.The WTC needs to be purchased separately and is not included in the submarine kit.Paint and glue are also not included in the hull kit.You can choose to purchase from the list on the web page.
WTC ARTR included:	The assembled WTC contains electrical parts such as motors and water pumps. It only needs to be installed into the hull to realize the navigation and diving functions of the submarine model. However, the finished WTC product does not include remote control equipment, batteries, steering gears, and electronics. Speed ??regulator, water tank control unit BCU and other electronic equipment, you can order these equipment by yourself in the web list, and we can install it for you for free.
Delivery time:	If not in stock, Kit delivery time is 3-5 weeks, ARTR delivery time is 5-10 weeks.

WTC Kit included:	WTC (water tight cylinder) is used to drive submarines for navigation and snorkeling. The kit consists of some parts that need to be assembled by yourself.The kit includes transparent tubes, motors, water pumps, sealing rings and other spare parts. It does not include steering gear, electronic speed controller, electronic switches, remote control equipment, batteries, etc.The WTC needs to be purchased separately and is not included in the submarine kit.Paint and glue are also not included in the hull kit.You can choose to purchase from the list on the web page.
WTC ARTR included:	The assembled WTC contains electrical parts such as motors and water pumps. It only needs to be installed into the hull to realize the navigation and diving functions of the submarine model. However, the finished WTC product does not include remote control equipment, batteries, steering gears, and electronics. Speed ??regulator, water tank control unit BCU and other electronic equipment, you can order these equipment by yourself in the web list, and we can install it for you for free.
Delivery time:	If not in stock, Kit delivery time is 3-5 weeks, ARTR delivery time is 5-10 weeks.

Absolutely Necessarily Part16000RPM/12V

Absolutely Necessarily PartKV850,axle 4，outer rotor

Absolutely Necessarily PartKV850, axle 2.3，outter rotor

Absolutely Necessarily Part12V/8500RPM

Absolutely Necessarily Part 【submarine need two servo,ships need one servo】 3003 standard servo ITEM:FUTM0031 Volts:4.8V/6.0V Torque:44 oz-in (3.2 kg-cm)/57 oz-in (4.1 kg-cm) Speed:0.23 sec/60°/0.19 sec/60° Dimensions: 1-9/16 x 13/16 x 1-7/16 in (40 x 20 x 36 mm) Weight: 1.3 oz (37 g)

Absolutely Necessarily Part【submarine need two servo,ships need one servo.】
Futaba S9252 Servos
This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and "J" Connector Pre-Installed.
This servo can produce high-current draw from your batteries If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES: Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction.
Coreless motor Dual ball bearings on the output shaft Plastic/nylon gear train Moderately high speed High current, high capacity wire lead with low resistance Case is made of Black plastic Dust and water resistant (Not waterproof) Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft.
One year warranty INCLUDES: One Digital All Purpose Servo w/Small Round Horn
Four Rectangular Grommets
Four Brass Bushings
Four Mounting Screws
One Large Round Horn
One Six Arm Horn
SPECS: Speed: 0.14 sec/60° @ 4.8V
Torque: 92 oz-in (6.6 kg-cm) @ 4.8V
Weight: 1.8oz (50g)
Power Supply: 4.8V (Futaba does not recommend using 6V)
Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)
COMMENTS: S9252 Digital Servo Precautions:
-It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series ,minimizing lead lengths, and/or removing Y-harnesses.
-Current Drain: Futaba S9252 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo, please review the following points.
(1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V each making the overall voltage 6V which will damage the gyro.
(2) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time.
(3) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery.
When Used With GY501 Gyro:
Switch the GY501 servo frame rate function (Frm) from "NOR" to "High" to display the performance of the gyro to the fullest. Setting Method:
(1) Press the GY501 FUNC+ or - key to call the Servo Frame Rate Setup Screen.
(2) Press the DATA+ or - key to display "High".
This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

Absolutely Necessarily Part
(submarine need two servo,ships need one servo)
Performance is similar to the FUTABA3003 standard servo.
The ARTR is already including this Servo.

Absolutely Necessarily Part It's used with the brush motor

Absolutely Necessarily Part It's used with the brush motor

This program box is used to program the brushless ESC, it has friendly user interface and easy to use.
PN: 86020030 (LED Program Box_2B)
Specification:
1. Size: 88mm*58mm*14mm
2. Weight: 40g.
3. Input Voltage: 4.8-6V
(If the ESC hasn’t built-in BEC, you need to use an additional battery to supply the program box).
Note:
Hobbywing has the following 3 program boxes, their hardware and software are all identical, bur they have different labels. User can print the suitable labels to make the program box to be suitable for more products.
PN: 86020010 (LED Program Box_2C)
PN: 86020030 (LED Program Box_2B)
PN: 86020020 (LED Program Box_2A)

Absolutely Necessarily Part
Cont./Peak Current:120A/720A
BEC Output:Switch Mode:6V/5A
Input Wires:Red-12AWG-200mm*1 Black-12AWG-200mm*1
Output Wires:Black-12AWG-150mm*3
(Note: All the wire length above is the original length not the length you see from the outside.)
Size:68.5x39.4x32mm
I.D./O.D. of the Water Cooling Pipe:Ф3.0/5.4 mm
Weight:150g

Absolutely Necessarily Part Scale：1/10th
Brushed/Brushless：Brushed
Cont./Peak Current：60A/360A
BEC Output：Switch Mode:6V/3A
Input Connectors：Big-sized TAMIYA Connector
Size：36.5x32.0x18.0mm
Weight：39g
Motors：Brushed Motors
Vehicles：1/10th Touring Cars/Buggies/Trucks/Rock Crawlers
KV Rating/T Count：2S LiPo: T≥12T；3S LiPo: T≥18T；(540/550 Size Motors)

Essential Part It's used to control the piston or waterpump motor forward,reverse and stop. It has 2-stroke 3 switchs,Auto-stop in any position.Signal loss,main low voltage,override depth and leak failsafe was included.Float automaticlly.Voltage 6-12V,Current 20A.Suit for all kinds Arkmodel WTC,It's very necessary for RC submarine.

Optional PartPressure Switch, it helps submarine’s maximum depth is limited to approx. 2 meters (6 ft). If the submarine dives below this level, the BCU will automatically switch to the "surfacing mode" and empty the Tank. The model will then resurface unless the three-stage switch (stick) is back in neutral position. Otherwise, with the stick left at "filling mode" the model will emerge to a depth above 2 meters after which the tank will start filling again (and so on).In order to maintain the depth of sailing in about two meters.

Pressure Switch installation: Pressure switch can be mounted anywhere inside the hull(WTC), let silicone tube be leveled , and the tube is connected to the bow endcap’s nozzle, pay attention to water leak at the nozzle. The nozzle should be connect the outside and touch water, so the pressure switch can sense the depth of water pressure.For avoid additional errors pressure (such as head-flow pressure), single hull submarines(without WTC), please using an external elbow, avoid direct water pressure impact pipelines.For a double hull submarine(with WTC) because the enternal hull can block the water flow, the nozzle can be directly facing forward.

Optional Part Used to plug in the RC switch channel，to control the simply switch action,such as light,depth,but cannot used for high voltage motor.

Absolutely necessarily part Intelligent charger with many advanced features.such as automatic detection,automatic constant current,automatic power failure,and it can charger various types of batteries.

Absolutely necessarily part INPUT:AC 100-240V 50/60Hz; OUTPUT:DC 12-6V,1000 mA; CAUTION:INDOOR USE ONLY。

Absolutely necessarily part Charger for NI-MH battery,rechargerable 6V-12V battery. INPUT:AC 100-240V 50/60Hz 0.2A. OUTPUT:2-6 PCS,800 mA; 7-10 PCS,500mA CAUTION:INDOOR USE ONLY。

Absolutely necessarily part INPUT:AC 175-264V 50/60Hz OUTPUT: DC 12V CAUTION:INDOOR USE ONLY

Absolutely Necessarily Part Uses in the Single pump tank(Single piston tank).

此单价为一个的价格，需要两个的请下单数量2，具体型号拍前联系客服

http://pan.baidu.com/s/1mgNqaU0

Optional Part Failsafe can protect your boat without signal can automatism float.when lost signal ,pump will work automaticly,ballast water will pump to outside.

Optional part miniature HDV D1 class SD card recorder,the quality of record can reach the hard disk recorder,use the SD card to record,less vibration ,compact design,suitable for the model which has no need to image transmitter ,and reach to the best recording effect(as image transmitter will have a certain damage for the image quality).Only 60x45mm module size,when powered off,you can continue the last record memorize after charging again. Support multiple record mode(boot record,rc record,etc.），bring MIC yourself,multiple lights indicator.Will not stop recording when the signal is not good,used in the ground to record series method can avoid the figure spread receiver signal not appear blue screen.Can use our company camera TX/RX system SCTR-1，SCTR-2，LCTR-2 ，etc.

Optional Part
Resolution:800X480
Backlight:LED
Aspect ratio:16:9
Response time:10ms
Color System:PAL/NTSC
Power Supply:Battery life
Input Signal:Video(PAL/NTSC)
Output Signal:Video
5.8G:Sensitivity -94db
E.or select SCAN option to start auto search.
Thirty-two 5.8G channels are covered

Optional Part M7 RC display kit,including 7" LCD display，lens hood,foldable RC stand,pow line "Y",T plug turn DC LINE set.Display detailed technical parameters: PLUG:2 channel AV video input (without power supply, not audio) LCD screen aspect ratio:16:9 Visual Angle:270° Power voltage:DC 12V Light lumen (center):350 Distinguishability:480×234 Screen size:7"(mm)154(H)×86.5(V) current consumption:0.5A Net weight:280g anti-vibration lever:5

Optional Part
Name:Mini FPV Box
Weight:83g
WIFI Power:50mw
Scan Model:Automatic
Battery Capacity:2000mAh
The Number of Simultaeously Connecting Devices:up to 5(under the WIFI mode)
Time of Endurance:3 hours(Wired Record)
Channesl: 150CH 5.645-5.945Ghz
Ways of Connection:Wired or WIFI

Optional part Including the magnetism waterproof switch,fixed ring,magnetic steel.

	ITEM:ES63300 Volume:300ml Max Size:220xΦ65mm Suitable Voltage:12V

Optional Part

The mooring system is very simple and reliable , you can mold your boat anywhere,and can not drift with the wind . Quick fitting link with the magnetism, it is very simple to use.It is essential for boat lovers . The product includes water drum, metal chain, quick fitting , magnetic fitting, hammer and other parts.

Optional Part
The 3A-UBEC is a switch mode DC/DC regulator, it outputs a consistent safe voltage for the receiver, gyro and servos. It is very suitable for RC helicopter and other RC models especially when the built-in BEC in the speed controller has a very limited output capability.
1 Specification
1.1 Output Voltage: 5V@3A or 6V@3A (Selectable by using a jumper connector)
1.2 Continuous output current: 3 Amps
1.3 Input: 5.5V-26V (2-6S Lipo or 5-18 cells NiMH /NiCd)
1.4 Size: 43mm*17mm*7mm (L*W*H)
1.5 Weight: 11g
2 Features
2.1 Uses an advanced switch mode DC-DC regulator IC.
2.2 The output is powerful enough even working with 4S to 6S Lipo battery.
2.3 Battery polarity reversal protection.
2.4 A metal shield and a filter significantly reduce the electromagnetic interference.
2.5 The working status is shown by an LED, it lights when the UBEC works normally.