Click in for product detail

Click in for product detail

Optional erhältliches Zubehör This standard carton box is made by EPE foam.the best choice to protect tank for carry. we recommend when by the finished model to by this plastic box together. However,Because of the uncontrollable factors we can't ensure that the model is no damaged in the transportation.

Optional erhältliches Zubehör Das ist ein aus Legierung hergestellter Kasten. Mit EVA-Schaumstoff darin kann dieser Kasten das Modell beim Transport schützen. Wir empfehlen Ihnen diesen Kasten, wenn Sie ein installiertes Modell kaufen. Wegen der unkontrollierbaren Faktoren von Transportunternehmen sichern wir nicht, dass das mit diesen Legierungskasten verpackte Modell beim Transportieren keine Beschädigung ist.

Optional erhältliches Zubehör Dieser Bootsständer ist aus Edelstahlrohr und transparenter Bord hergestellt. Geeignet zu einer Schau

Erforderliche Komponente Standardservo 3003

Erforderliche Komponente
Futaba Servo S9252
【submarine need two servo,ships need one servo.】
This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and "J" Connector Pre-Installed.
This servo can produce high-current draw from your batteries If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES: Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction.
Coreless motor Dual ball bearings on the output shaft Plastic/nylon gear train Moderately high speed High current, high capacity wire lead with low resistance Case is made of Black plastic Dust and water resistant (Not waterproof) Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft.
One year warranty INCLUDES: One Digital All Purpose Servo w/Small Round Horn
Four Rectangular Grommets
Four Brass Bushings
Four Mounting Screws
One Large Round Horn
One Six Arm Horn
SPECS: Speed: 0.14 sec/60° @ 4.8V
Torque: 92 oz-in (6.6 kg-cm) @ 4.8V
Weight: 1.8oz (50g)
Power Supply: 4.8V (Futaba does not recommend using 6V)
Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)
COMMENTS: S9252 Digital Servo Precautions:
-It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series ,minimizing lead lengths, and/or removing Y-harnesses.
-Current Drain: Futaba S9252 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo, please review the following points.
(1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V each making the overall voltage 6V which will damage the gyro.
(2) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time.
(3) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery.
When Used With GY501 Gyro:
Switch the GY501 servo frame rate function (Frm) from "NOR" to "High" to display the performance of the gyro to the fullest.
Setting Method:
(1) Press the GY501 FUNC+ or - key to call the Servo Frame Rate Setup Screen.
(2) Press the DATA+ or - key to display "High".
This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us).
CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

Absolutely Necessarily Part 【submarine need two servo(Type VIIC need three servo),ships need one servo,The ARTR is already including this Servo.】
S3115 Precision Micro Mini
ITEM:FUTM0415
Volts:4.8V / 6.0V
Torque:39 oz-in (2.8 kg-cm) / n/a
Speed:0.15 sec/60°/ n/a
Dimensions:
1-1/8 x 1/2 x 1-3/16 in
(28 x 13 x 30 mm)
Weight: 0.6 oz (17 g)

Erforderliche Komponente
(submarine need two servo,ships need one servo)
Die Leistung ist ähnlich wie Standardservo Futaba3003.
Das installiertes Modell enthält bereits diese Servo.

Erforderliche Komponente INPUT:AC 100-240V 50/60Hz; OUTPUT:DC 12-6V,1000 mA; CAUTION:INDOOR USE ONLY。

the price is only quantity 1 not a pair, please pay quatity 2 if you need a pair(left and right)

The mooring system is very simple and reliable , you can mold your boat anywhere,and can not drift with the wind . Quick fitting link with the magnetism, it is very simple to use.It is essential for boat lovers . The product includes water drum, metal chain, quick fitting , magnetic fitting, hammer and other parts.