Click in for product detail

Click in for product detail

Optional erhältliches Zubehör Das ist ein aus Legierung hergestellter Kasten. Mit EVA-Schaumstoff darin kann dieser Kasten das Modell beim Transport schützen. Wir empfehlen Ihnen diesen Kasten, wenn Sie ein installiertes Modell kaufen. Wegen der unkontrollierbaren Faktoren von Transportunternehmen sichern wir nicht, dass das mit diesen Legierungskasten verpackte Modell beim Transportieren keine Beschädigung ist.

Erforderliche Komponente Standardservo 3003

Erforderliche Komponente
Futaba Servo S9252
【submarine need two servo,ships need one servo.】
This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and "J" Connector Pre-Installed.
This servo can produce high-current draw from your batteries If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES: Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction.
Coreless motor Dual ball bearings on the output shaft Plastic/nylon gear train Moderately high speed High current, high capacity wire lead with low resistance Case is made of Black plastic Dust and water resistant (Not waterproof) Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft.
One year warranty INCLUDES: One Digital All Purpose Servo w/Small Round Horn
Four Rectangular Grommets
Four Brass Bushings
Four Mounting Screws
One Large Round Horn
One Six Arm Horn
SPECS: Speed: 0.14 sec/60° @ 4.8V
Torque: 92 oz-in (6.6 kg-cm) @ 4.8V
Weight: 1.8oz (50g)
Power Supply: 4.8V (Futaba does not recommend using 6V)
Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)
COMMENTS: S9252 Digital Servo Precautions:
-It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series ,minimizing lead lengths, and/or removing Y-harnesses.
-Current Drain: Futaba S9252 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo, please review the following points.
(1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V each making the overall voltage 6V which will damage the gyro.
(2) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time.
(3) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery.
When Used With GY501 Gyro:
Switch the GY501 servo frame rate function (Frm) from "NOR" to "High" to display the performance of the gyro to the fullest.
Setting Method:
(1) Press the GY501 FUNC+ or - key to call the Servo Frame Rate Setup Screen.
(2) Press the DATA+ or - key to display "High".
This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us).
CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

Erforderliche Komponente
(submarine need two servo,ships need one servo)
Die Leistung ist ähnlich wie Standardservo Futaba3003.
Das installiertes Modell enthält bereits diese Servo.

This program box is used to program the brushless ESC, it has friendly user interface and easy to use.
PN: 86020030 (LED Program Box_2B)
Specification:
1. Size: 88mm*58mm*14mm
2. Weight: 40g.
3. Input Voltage: 4.8-6V
(If the ESC hasn’t built-in BEC, you need to use an additional battery to supply the program box).
Note:
Hobbywing has the following 3 program boxes, their hardware and software are all identical, bur they have different labels. User can print the suitable labels to make the program box to be suitable for more products.
PN: 86020010 (LED Program Box_2C)
PN: 86020030 (LED Program Box_2B)
PN: 86020020 (LED Program Box_2A)

Pressure Switch installation: Pressure switch can be mounted anywhere inside the hull(WTC), let silicone tube be leveled , and the tube is connected to the bow endcap’s nozzle, pay attention to water leak at the nozzle. The nozzle should be connect the outside and touch water, so the pressure switch can sense the depth of water pressure.For avoid additional errors pressure (such as head-flow pressure), single hull submarines(without WTC), please using an external elbow, avoid direct water pressure impact pipelines.For a double hull submarine(with WTC) because the enternal hull can block the water flow, the nozzle can be directly facing forward.

Erforderliche Komponente INPUT:AC 100-240V 50/60Hz; OUTPUT:DC 12-6V,1000 mA; CAUTION:INDOOR USE ONLY。

Erforderliche Komponente Ladegerät für 6v-12v NiMH Akku
INPUT:AC 100-240V 50/60Hz 0.2A. OUTPUT:2-6 PCS,800 mA; 7-10 PCS,500mA CAUTION:INDOOR USE ONLY。

Erforderliche Komponente Intelligentes Ladegerät mit vielen erweiterten Besonderheiten wie automatische Erkennung, automatische Konstantstrom, automatischer Stromausfall. Geeignet für verschiedene Sorten Akkus.

Optional erhältliches Zubehör Mit Wasserdichter Magnetschalter, Magnetstahl und Festring

The mooring system is very simple and reliable , you can mold your boat anywhere,and can not drift with the wind . Quick fitting link with the magnetism, it is very simple to use.It is essential for boat lovers . The product includes water drum, metal chain, quick fitting , magnetic fitting, hammer and other parts.